Nano Round Replacement Cartridges for Dr.Pen A11 (10 Pack)
$59.00
Unlock the full potential of your Dr. Pen A11 Microneedling Pen with Nano Round Nanoneedle Cartridges, designed for a weekly skin boost and rejuvenation. Nanoneedling, suitable for all skin types and perfect for beginners, provides a needle-free solution for enhanced skincare benefits.
The Nano Round Nanoneedling Cartridge is one of two exceptional options available for nanoneedling cartridges compatible with the Dr. Pen A11 Microneedling Pen.
Key Benefits of Nano Round Nanoneedling:
– 97% increase in product absorption compared to topical application
– No need for numbing cream
– Instant glow effect on the skin
– Stimulates collagen production
– Brightens the skin tone
– De-puffs swollen-looking areas
– Safe for use in-between microneedling sessions
– No downtime required
– Compatible with active skincare ingredients
– Makeup application/skincare can be resumed immediately after treatment
**New and Enhanced Features:**
– Adopts a wavy contact surface for improved skincare product absorption
– Equipped with a three-snap fixed structure to prevent backflow, enhancing performance and protecting the device
– Easily connected with Dr. Pen A11 Microneedling Pen
– Tip made from high-quality silicone material
What’s Included:
– 10x pack of Nano Round Nanoneedle Cartridges for Dr. Pen A11 Microneedling Pen
DO NOT USE:
– On open wounds
– On broken skin
– On active acne
– If irritation occurs
Important Sterilization Steps:
1. Ensure necessary equipment for sterilization: gloves, isopropyl alcohol solution (70% or above), and a clean container.
2. Put on gloves to avoid contamination.
3. Check the cartridge for perfect needle condition, ensuring no bending, and remove any debris.
4. Dip the cartridge needle into isopropyl alcohol solution or use a spray model, then soak for a couple of minutes.
5. Allow the cartridge to air dry before use.
How to Use:
1. All cartridges come with a sterile pack.
2. Remove the sterile cover on the top of the cartridge.
3. Put and connect the cartridge to the Dr. Pen A11 Microneedling Pen device.
4. Double-cleanse the face and ensure it’s clean before applying your favorite skincare products.
5. Tie back hair and remove it from the face area.
6. Configure the depth of the nano cartridge according to your preference.
7. Set the specific speed for your treatment.
8. Turn the pen on, then slowly start the treatment in small areas.
9. Use only a cross-hatch pattern to cover all skin areas.
10. Apply light pressure and ensure not to drag or pull the skin.
Usage Guidelines:
– Nanoneedling treatment can be performed weekly without downtime with active/non-active ingredients.
– Perform nanoneedling in between microneedling sessions to boost results.
– Use Femvy Hyaluronic Acid or Femvy Peptide Complex Serum to complete your treatment.
Disclaimer:
Consult your doctor before purchasing any Dr. Pen products. The information provided here is not a substitute for professional medical advice. Read and follow all instructions and information provided with the product. If you have medical concerns, contact your healthcare provider promptly. This product has not been evaluated by the FDA and is not intended to diagnose, treat, cure, or prevent any disease or health condition. For any concerns or questions, please contact your GP or dermatologist.
How to Use Microneedling Devices: A Comprehensive Guide
I. Preparation
Required Products:
- MTSPEN microneedling device (such as Dr. Pen A11, M8S, A9, or Hydra Pen H5)
- New microneedle cartridge (must be replaced for each use)
- Disinfecting alcohol solution (60% alcohol mixed with purified water)
- Cotton pads
- Facial cleanser
- Hyaluronic acid serum (recommended for microneedling treatment)
- Clean towel
- Optional: surgical gloves
- Optional: numbing cream (containing 5% lidocaine)
Pre-Treatment Preparation:
- Avoid Specific Substances: Refrain from taking anti-inflammatory medication, alcohol, or fish oil supplements for 3 days before treatment to reduce bleeding risk.
- Cleanse Your Face:
- Tie your hair back completely away from your face
- Thoroughly cleanse your face twice with your preferred cleanser to remove all traces of makeup and lotions
- Any dirt, oil, or stray hairs touching your skin can increase infection or irritation risk
- Apply Numbing Cream (Optional):
- If your skin is sensitive, use numbing cream containing 5% lidocaine
- Apply approximately half the tube to the treatment area
- Leave on for 20-30 minutes, then thoroughly remove
- Use 60% alcohol mixed with purified water or 0.1 chlorhexidine to wipe off any remaining numbing cream
- Removing the numbing cream ensures it won't enter the microchannels created during treatment
- Prepare Your Device:
- Ensure the device is fully charged or near a power source
- Sterilize the device surface and work area
- Keep alcohol readily available
- To avoid cross-contamination, don't touch anything other than your skin and device during treatment
- Consider pouring serum into a small bowl and applying with a brush to maintain hygiene
II. Microneedling Procedure
- Apply Serum:
- Apply hyaluronic acid serum to the treatment area to lubricate the skin
- The serum helps needles glide smoothly over the skin, preventing pulling
- Avoid using Vitamin C, retinol, exfoliants, or brightening ingredients during treatment as they may cause irritation
- Install the Cartridge:
- Ensure your hands are clean; wear gloves if preferred
- Open a new microneedle cartridge package and attach it to your device
- Do not touch the needle tips
- Adjust Needle Depth:
- Select your desired needle depth by rotating the dial on your device
- Recommended depths for different facial areas:
- Forehead: 0.25-0.5mm
- Around eyes: 0.15-0.25mm
- Cheeks: 0.5-1.0mm
- Chin/jawline: 0.5-1.0mm
- Nose: 0.25-0.5mm
- Upper lip: 0.25-0.5mm
- Neck: 0.5-1.0mm
- Body: 0.5-1.5mm (for fleshier areas)
- Perform Microneedling:
- Work in small areas, applying serum to the skin just before needling each section
- The recommended movement pattern is vertical, horizontal, then diagonal in both directions
- Work in a grid pattern so you know exactly which areas you have and haven't treated
- Use light pressure and keep the skin taut with your free hand
- Repeat this motion twice over each area
- Body Area Considerations:
- When treating body areas (such as legs or hands), avoid needling over bony parts (especially on legs)
- Only use 36-42 pin cartridges for body microneedling
- For legs, use 0.5mm needle depth
- For fleshier areas, depths up to 1.5mm can be used
III. Post-Microneedling Care
Immediate Aftercare:
- If desired, gently wash your face with lukewarm water
- Immediately apply hyaluronic acid serum to the treated area to provide hydration and soothe the skin
- Mild redness, swelling, and pinpoint bleeding after microneedling treatment are normal and nothing to worry about
- Avoid exercising/sweating or applying makeup for 24 hours
- Apply high-protection sunscreen when going outside
- If makeup is unavoidable, use products specifically designed for post-treatment or sensitive skin to avoid irritation
24 Hours After Treatment:
- Cleanse your face with a gentle cleanser and apply a nourishing moisturizer
- Avoid products containing fragrances, active ingredients (vitamin C, A/retinol), acids (lactic, AHA, BHA), physical scrubs, or toners that may cause irritation
- Your skin may experience mild swelling, bruising, peeling, and flaking. Minimize these effects by keeping the skin moisturized, which will reduce shedding and alleviate tightness
- Continue to avoid exercising, excessive sweating, swimming, or applying makeup for 24 hours
- Always apply high-protection sunscreen when outdoors and avoid prolonged sun exposure
48 Hours After Treatment:
- Optional: If you have dry/flaking skin, you can begin gently exfoliating to speed up recovery
- Do not use chemical or harsh physical exfoliants; opt for a washcloth with gentle pressure
- If your skin feels sensitive, do not exfoliate—the dryness and flaking will naturally subside
- Continue hydrating your skin morning and night
3-5 Days After Treatment:
- Continue applying high-protection sunscreen daily and avoid direct and extended sun exposure
- Focus your skincare routine on hydrating and moisturizing products
- Continue avoiding active ingredients, acids, scrubs, and toners
7+ Days After Treatment:
- You may return to your regular skincare routine
- Wait at least 4-6 weeks before your next microneedling treatment to allow full skin recovery
IV. Recommended MTSPEN Products
Microneedling Device Series:
- Pylai Pen 4 Auto Microneedle System:
- Designed to tighten, lift, and rejuvenate skin
- Particularly effective for fine lines around the lips, eyes, and forehead, reducing scars and stretch marks, and addressing aging and hyperpigmentation issues
- Hydra Pen H5Â Serum Infusion Microneedling System:
- Combines 4-pole EMS (Electrical Muscle Stimulation) technology with microneedling
- Provides deep nourishment while enhancing the skin's natural healing process
- Especially suitable for reducing wrinkles, fine lines, and improving skin texture
- Classic Microneedling Pen Series:
- Includes various models such as Q2, A11, A9, M8, and M8S
- Targets different application scenarios and treatment needs
Complementary Skincare Products:
- Serum Series:
- Specially designed to work with microneedling treatments
- Contains high concentrations of active ingredients delivered directly to the dermal layer through channels created by microneedling
- Repair Products:
- Help skin recover quickly after microneedling treatment
- Enhance treatment effects
- Gentle Cleansing and Moisturizing Products:
- Suitable for use before and after microneedling treatment
- Non-irritating to sensitive skin that has received treatment
V. Frequently Asked Questions
Is microneedling painful?
How long is the recovery period?
How often can I do microneedling?
What skin concerns can be addressed with microneedling?
- Neck wrinkles
- Acne scars
- Fine lines and wrinkles
- Enlarged pores
- Uneven skin tone
- Receding hairline/thinning hair
You must be logged in to post a review.
Reviews
There are no reviews yet.