Dr. Pen A9 Face and Body Combo Cartridges (5-pack)
$27.00
Description
Description
This Dr. Pen A9 Combo Cartridge Pack is designed for face and body treatment, effectively addressing the signs of aging, surgical and acne scars, pigmentation, as well as scarring and stretch marks in body areas.
This kit is the ultimate all-in-one pack for treating skin concerns for both the face and body.
The 12-Pin Microneedle Cartridge needles are optimized for enhancing the appearance of fine lines, acne scars, and the overall skin texture of the face by promoting collagen production.
The 36-Pin Microneedle Cartridges are specifically designed for targeted body area skin concerns, such as:
- Acne scarring & Other body Scarring
- Surgical Scars
- Stretch marks
- Body skin texture
- Hair loss
To further boost your microneedling results, consider incorporating gentle nano needling sessions in between your microneedling treatments with the round nano cartridge.
Nano needling facilitates the creation of nanochannels in your face, enhancing the absorption of your favorite skincare products and stimulating collagen production. (Tip: Pair nano needling with a Femvy Peptide Complex Serum for optimal results).
Each pack contains 5 high-quality stainless steel cartridges for your Dr. Pen A9 Professional Microneedling Pen.
For Best Results:
- Perform microneedling only every 4-6 weeks.
- Nanoneedling can be performed once a week (ideally in between your microneedling treatments).
Key Features:
- Needles are made from high-quality stainless steel, suitable for applications including surgical procedures, deep wrinkles, and acne scarring.
- Cartridges are intended for single use only. Do not reuse the same cartridge.
- Compatible with the NEW Dr. Pen A9 (device not included).
What’s included?
- 2 x 12-pin cartridges for the Dr. Pen A9 Microneedling Pen
- 2 x 36-pin cartridges for the Dr. Pen A9 Microneedling Pen
- 1 x Round Nano cartridge for the Dr. Pen A9 Microneedling Pen
*MICRONEEDLING PEN NOT INCLUDED, SOLD SEPARATELY
Important: Microneedling cartridges must be sterilized before each use to ensure the treatment is safe and hygienic. It is crucial to meticulously follow these steps to ensure proper sterilization of microneedling cartridges:
- Ensure that you have all the necessary equipment for sterilization; gloves, isopropyl alcohol solution (70% or above), and a clean container to hold the solution.
- Wear gloves to prevent contaminating the cartridges during the sterilization process.
- Inspect your cartridge; ensure the needles are in perfect condition (i.e., not bent) and remove any debris.
- Pour enough alcohol solution into the container and dip the cartridge needle into a sterilization container, then soak for a couple of minutes.
- If you have alcohol solution in a spray model, you can spray it towards the needle head of the cartridge.
- Once sterilization is complete, allow the cartridge to air dry before using it.
- Your cartridge is now ready for use.
How to use:
- Sterilize cartridges before treatment to prevent cross-contamination.
- Securely tie back your hair away from your face.
- Double-cleanse (cleanse and repeat), then wipe the skin clean with an alcohol wipe.
- Apply the serum (recommended: Femvy Hyaluronic Acid Serum) to each area before needling to ensure the pen glides smoothly over the skin without dragging or pulling.
- For best results, move the pen in vertical, horizontal, and diagonal directions over each area twice, using light pressure and without dragging.
How to use nano needling:
- Start by securing your hair away from your face. Cleanse the face to remove all makeup, dirt, oil, and other debris.
- Attach a new nano cartridge to the Dr. Pen device carefully, avoiding touching the tip to prevent contamination.
- Apply a few drops of a hydrating serum (Femvy Hyaluronic Serum or Femvy Peptide Complex Serum) to the face before working in small areas.
- Move the A9 microneedling pen in vertical, horizontal, and then diagonal directions, working in a grid pattern to ensure thorough coverage.
- Use only light pressure on the skin when using the device.
Please note: Comprehensive instructions are included with the device, featuring diagrams and helpful advice to achieve the best results. These instructions are also available for download via our help desk at any time, and our customer service team is ready to answer any questions.
DO NOT USE:
- On open wounds.
- On acne or irritated skin.
- If irritation occurs.
Please consult your doctor before purchasing any Dr. Pen products. The content on this site is not intended to replace professional medical advice. The products may contain additional information and instructions on or inside the packaging that you should carefully read and follow. Contact your healthcare provider immediately if you suspect you have a medical issue. This product may not have been evaluated by the Food and Drug Administration and is not intended to diagnose, treat, cure, or prevent any disease or health condition. For any concerns or questions, please contact your general practitioner or dermatologist.
How to Use Microneedling Devices
How to Use Microneedling Devices
How to Use Microneedling Devices: A Comprehensive Guide
I. Preparation
Required Products:
- MTSPEN microneedling device (such as Dr. Pen A11, M8S, A9, or Hydra Pen H5)
- New microneedle cartridge (must be replaced for each use)
- Disinfecting alcohol solution (60% alcohol mixed with purified water)
- Cotton pads
- Facial cleanser
- Hyaluronic acid serum (recommended for microneedling treatment)
- Clean towel
- Optional: surgical gloves
- Optional: numbing cream (containing 5% lidocaine)
Pre-Treatment Preparation:
- Avoid Specific Substances: Refrain from taking anti-inflammatory medication, alcohol, or fish oil supplements for 3 days before treatment to reduce bleeding risk.
- Cleanse Your Face:
- Tie your hair back completely away from your face
- Thoroughly cleanse your face twice with your preferred cleanser to remove all traces of makeup and lotions
- Any dirt, oil, or stray hairs touching your skin can increase infection or irritation risk
- Apply Numbing Cream (Optional):
- If your skin is sensitive, use numbing cream containing 5% lidocaine
- Apply approximately half the tube to the treatment area
- Leave on for 20-30 minutes, then thoroughly remove
- Use 60% alcohol mixed with purified water or 0.1 chlorhexidine to wipe off any remaining numbing cream
- Removing the numbing cream ensures it won't enter the microchannels created during treatment
- Prepare Your Device:
- Ensure the device is fully charged or near a power source
- Sterilize the device surface and work area
- Keep alcohol readily available
- To avoid cross-contamination, don't touch anything other than your skin and device during treatment
- Consider pouring serum into a small bowl and applying with a brush to maintain hygiene
II. Microneedling Procedure
- Apply Serum:
- Apply hyaluronic acid serum to the treatment area to lubricate the skin
- The serum helps needles glide smoothly over the skin, preventing pulling
- Avoid using Vitamin C, retinol, exfoliants, or brightening ingredients during treatment as they may cause irritation
- Install the Cartridge:
- Ensure your hands are clean; wear gloves if preferred
- Open a new microneedle cartridge package and attach it to your device
- Do not touch the needle tips
- Adjust Needle Depth:
- Select your desired needle depth by rotating the dial on your device
- Recommended depths for different facial areas:
- Forehead: 0.25-0.5mm
- Around eyes: 0.15-0.25mm
- Cheeks: 0.5-1.0mm
- Chin/jawline: 0.5-1.0mm
- Nose: 0.25-0.5mm
- Upper lip: 0.25-0.5mm
- Neck: 0.5-1.0mm
- Body: 0.5-1.5mm (for fleshier areas)
- Perform Microneedling:
- Work in small areas, applying serum to the skin just before needling each section
- The recommended movement pattern is vertical, horizontal, then diagonal in both directions
- Work in a grid pattern so you know exactly which areas you have and haven't treated
- Use light pressure and keep the skin taut with your free hand
- Repeat this motion twice over each area
- Body Area Considerations:
- When treating body areas (such as legs or hands), avoid needling over bony parts (especially on legs)
- Only use 36-42 pin cartridges for body microneedling
- For legs, use 0.5mm needle depth
- For fleshier areas, depths up to 1.5mm can be used
III. Post-Microneedling Care
Immediate Aftercare:
- If desired, gently wash your face with lukewarm water
- Immediately apply hyaluronic acid serum to the treated area to provide hydration and soothe the skin
- Mild redness, swelling, and pinpoint bleeding after microneedling treatment are normal and nothing to worry about
- Avoid exercising/sweating or applying makeup for 24 hours
- Apply high-protection sunscreen when going outside
- If makeup is unavoidable, use products specifically designed for post-treatment or sensitive skin to avoid irritation
24 Hours After Treatment:
- Cleanse your face with a gentle cleanser and apply a nourishing moisturizer
- Avoid products containing fragrances, active ingredients (vitamin C, A/retinol), acids (lactic, AHA, BHA), physical scrubs, or toners that may cause irritation
- Your skin may experience mild swelling, bruising, peeling, and flaking. Minimize these effects by keeping the skin moisturized, which will reduce shedding and alleviate tightness
- Continue to avoid exercising, excessive sweating, swimming, or applying makeup for 24 hours
- Always apply high-protection sunscreen when outdoors and avoid prolonged sun exposure
48 Hours After Treatment:
- Optional: If you have dry/flaking skin, you can begin gently exfoliating to speed up recovery
- Do not use chemical or harsh physical exfoliants; opt for a washcloth with gentle pressure
- If your skin feels sensitive, do not exfoliate—the dryness and flaking will naturally subside
- Continue hydrating your skin morning and night
3-5 Days After Treatment:
- Continue applying high-protection sunscreen daily and avoid direct and extended sun exposure
- Focus your skincare routine on hydrating and moisturizing products
- Continue avoiding active ingredients, acids, scrubs, and toners
7+ Days After Treatment:
- You may return to your regular skincare routine
- Wait at least 4-6 weeks before your next microneedling treatment to allow full skin recovery
IV. Recommended MTSPEN Products
Microneedling Device Series:
- Pylai Pen 4 Auto Microneedle System:
- Designed to tighten, lift, and rejuvenate skin
- Particularly effective for fine lines around the lips, eyes, and forehead, reducing scars and stretch marks, and addressing aging and hyperpigmentation issues
- Hydra Pen H5 Serum Infusion Microneedling System:
- Combines 4-pole EMS (Electrical Muscle Stimulation) technology with microneedling
- Provides deep nourishment while enhancing the skin's natural healing process
- Especially suitable for reducing wrinkles, fine lines, and improving skin texture
- Classic Microneedling Pen Series:
- Includes various models such as Q2, A11, A9, M8, and M8S
- Targets different application scenarios and treatment needs
Complementary Skincare Products:
- Serum Series:
- Specially designed to work with microneedling treatments
- Contains high concentrations of active ingredients delivered directly to the dermal layer through channels created by microneedling
- Repair Products:
- Help skin recover quickly after microneedling treatment
- Enhance treatment effects
- Gentle Cleansing and Moisturizing Products:
- Suitable for use before and after microneedling treatment
- Non-irritating to sensitive skin that has received treatment
V. Frequently Asked Questions
Is microneedling painful?
How long is the recovery period?
How often can I do microneedling?
What skin concerns can be addressed with microneedling?
- Neck wrinkles
- Acne scars
- Fine lines and wrinkles
- Enlarged pores
- Uneven skin tone
- Receding hairline/thinning hair
You must be logged in to post a review.
Reviews
There are no reviews yet.